Zingco X-Razer EX Road Bike Reflective Fender Set ( Caliper brake only )

$45.00

Clear
Compare
SKU: ZG-EX Categories: , , ,

Description

Product Specification:
1.Configuration with Quick-release structure for easy installation and removal .
2.Safety disconnect structure to prevent from being jammed .
3.The reflective paint can be effective to be seen by drivers during the night time

Specification:

  • Wheel Size
  • Profile Size
  • Front Fender (1)
  • Front Fender (2)
  • Rear Fender
  • 700C 33mm
  • 23”
  • 1.3 in
  • 5.9 in
  • 14 in
  • 22 in
  • 700C 38mm
  • 28”
  • 1.5 in
  • 5.9 in
  • 14 in
  • 22 in

Package included:
Fender x 3
Fender Clip x 8 (+1 for spare)
Stainless Bracket x 3
Stainless Stay x 4
Safety Disconnect Clip x 4
User Manual x 1

Fender Setup: 
Step 1. Screw the Fender Clip on the Fender and make it tight . 
Step 2. Install the Stainless Stay in to the Fender Clip and screw it tight . 

Safety Disconnect Clip & Stainless Bracket installation: 
Step 1. Install the Safety Disconnect Clip in to the hub qr and lock it . 
Notice : Fits hub qr diameter less than 0.32 x 0.2 in . 
Step 2. Release the screw of caliper brake and install the stainless bracket in it . 
Notice : The bracket needs to put between caliper brake and spacer washer . 
Step 3. Screw the caliper brake tight after put in the stainless bracket . 
Notice : The bracket needs to be align the tire . 

Install Fender on the bike: 
Step 1. Open the safety disconnect clip and the quick release button on the fender . 
Step 2. Plug in the stainless stay to the safety disconnect clip and connect to the fender quick release to the bracket . 
Step 3. Close the quick release button on the fender first then the safety disconnect clip . 
Step 4. Connect the 5.9 in fender to the bracket . 

Additional information:
1. Only fits on road bike with caliper brake .
2. Fits hub axle diameter less than 8.2 x 5.2 mm ( 0.32 x 0.2 in ) .
3. The space between frame fork and tire can not less than 10 mm ( 0.4 in ) .

NOTE: 
The material used to produce this product is passed the DIN EN471 inspection report . 
Due to the painting color and wet by water will cause decline of reflective effect .

Additional information

Weight N/A

Reviews

There are no reviews yet.

Be the first to review “Zingco X-Razer EX Road Bike Reflective Fender Set ( Caliper brake only )”

Your email address will not be published. Required fields are marked *