1. Tool-Freeforassembly and installation
2. Lightweight and easy to install or remove
3. FitsuptoØ 32.5 mm seatpost .
TOOL-FREE FOR ASSEMBLY AND INSTALLATION
FITS UPTO Ø 1.28 in SEATPOSTS .
L x W x H｜19.7 x 4.7 x 3.9 in
PP Mudguard x 1
Mudguard Fixed Frame x 1
Non-Slip Pads x 1
Rubber Belt x 2
Plastic Buckle x 4 ( +1 for spare )
Step 1. Combine the Mudguard Fixed Frame to the PP Mudguard .
Notice : Make sure the mudguard board is fit tight in the fixed frame gap .
Step 2. Install the Plastic Buckle to fixed the frame and mudguard .
Setup Seatpost Quick-Release Strap:
Step 1. To Fasten the strap please disassemble the left valve first .
Use the strap to rotate the seat post .
Step 2. Clip the left valve in to the main part and fixed it so it can rotate properly .
Meanwhile the strap will stuck in the middle between main part and left valve .
Step 3. Fasten the strap and pass through the first gap of the valve .
Step 4. Close the left valve slowly .
Notice : Strength the strap while close the valve so it won’t get loose .
Step 5. Then close the right valve .
Step 6. The surplus from the strap can put it in the second gap on the valve .
Step 7. Combine the mudguard with the Setup Seatpost Quick-Release Strap .
Step 8. Loose the knob to adjust the angle .
1. Hand wash only
2. Avoid from corrosive cleaning liquid
3. Flat dry only